Delivery & Return:Free shipping on all orders over $50
Estimated Delivery:7-15 days international
People:24 people viewing this product right now!
Easy Returns:Enjoy hassle-free returns within 30 days!
Payment:Secure checkout
SKU:62087170
Need safe, comfortable, quick heater. Infrared heater DR-975 heavy-duty hardwired shop garage heater can be easily installed in your new or remodeled building. This 7500W heater can be the primary or auxiliary heat source ideally suited for use in garages, factories, stores, warehouses, workshops, Schools, churches, hospitals, dormitories, or any exposed spaces. The DR-975 uses spiral steel metal sheath electric heating elements with low sheath temperatures, providing uniform heat and long lasting product life. Additionally, a large, matched, dynamic fan provides maximum air flow with minimum Turbulence and noise, gently distributing warmth throughout your space. The heavy duty ball bearing motor is totally enclosed, thermally protected, and permanently lubricated, requiring minimal maintenance. Built-in adjustable remote-controlled thermostat allows you to set your desired temperature between 50 - 85 degrees. If desired, an optional wall-mounted external thermostat can be wired to this heater (sold separately, does not come with heater). rugged stamped steel front cover features five adjustable louvers for easy airflow control. Can be mounted on either the wall or ceiling (bracket included). finished in a white epoxy paint. UL & CUL listed. 1 year limited component warranty.
Heavy duty 240V single Phase 4700W/7500W electric heater
Hardwired; Power cord not included, Use 8 AWG copper wires for connection.
Remote controlled thermostat with temperature range from 50 - 85 degree
5 adjustable louvers to direct airflow
UL/CUL listed; timer feature; heavy duty fully enclosed motor
First off, this is a great little unit. It kicks off a ton of heat, and if its setup right, it's super easy to use and has some great features. The first thing to know: don't use the internal thermostat. The concept is simply flawed because it's internal and the unit generally sits high in the space it's heating. It means that no matter how high you set the temp using the internal thermostat, it will likely trigger the off way before the space is actually to temp.You NEED to buy the associated Dr. Infrared thermostat - it works great when it's setup correctly - BUT YOU HAVE TO SET IT UP RIGHT. Follow the instructions, use the red and black leads on the back of the unit and run the cables properly to the wall thermostat. Locate the wall thermostat somewhere else where it's not being directly blown on by the heater. Switch the heater to "external" thermostat using the toggle on the back and boom - you're good to go. It works like a charm and is super accurate. I have my wall thermostat set to 50 degrees F and my mercury-based thermometer I keep in the same space says 50 on the money. That automatically cycles the unit on/off as needed. Just know that you still need to use the remote to turn the unit ON once even after setting up the wall thermostat. From then on you only need to use the remote if you want to turn the unit off. When using the "wall thermostat" feature, the remote cannot be used to control the temp. I leave the unit on HIGH - that gives you the full 7000+ watt experience you came for.The thing heats up my garage in like 5-10 minute cycles even when it's in the negatives in Minnesota. It's great, super reliable. The thing I really am amazed by is how well these electric heaters compare to natural gas heaters. Not only are they literally 1/10 the cost ($200 to $300 vs $2000 - $3000 for gas), they are so much smaller and don't require me to run costly gas lines into my garage - which is especially difficult for me considering my garage is detached. I have a 70 amp sub-panel in my garage so this was literally a perfect fit.Also, last thoughts. Use the appropriate gauged wiring. I got a 40 amp double pole breaker and it works great for this. It needs 2 hots and a ground to operate correctly in HIGH - which is the best situation. Some people have noticed it kicking into low randomly even when connected properly. If this is happening, it's a known manufacturing defect with a previous version - so if you have this happening just get in contact with them and they'll send you a newer model. I did not have this issue so 5 stars for me.By far the hardest part is figuring out the wall thermostat. It's a little tough to to get the black and red leads into the back of the machine. The instructions for the wall therm also suck - but that's not the unit's fault. Overall a great machine. High output, easy to install and use, and electric so very convenient and let's face it - future proof. Everything is going to be electric in 20 years. Get ahead of the curve.
